Configuration

System Mechanical Format
The Analyst ems is provided with a stand-alone long-travel pneumatic fixture press built into a rack-cabinet. This unit can be installed on your factory floor, and is ready for use once connected to standard compressed air and an AC outlet. The standard configuration is complete for most testing operations. It requires only one load/unload cycle per test, with no lids or doors for the operator to manipulate between tests. CheckSum can ship the system to you complete with a ready-to-use test fixture and test program for one or more of your UUTs. You can use CheckSum's fixturing division to handle all of your fixturing and programming needs; or you can modify or add UUTs yourself or with the use of third-parties

Low Cost Fixturing
The optional CheckSum fixture kit, KIT2KN-QC, is low-cost to minimize your recurring costs. It includes storage handles to make storage and moving easy. Installing the fixture kit simply involves clicking the two parts into place. The bottom assembly includes a fiberglass probe plate with a fixture interface section and pan covering the wiring.

The top assembly is a clear polycarbonate plate that is used with pressure rods to press the UUT down onto the spring-probes. The top assembly can be machined and milled with openings for top access to the UUT to allow for switch settings and adjustments. The front of the UUT is accessible during test time for adjustment access.

To run a test, the operator places the UUT on the fixture guide pins, then presses the start test buttons. Once the test is completed, the system displays the results and the fixture top automatically rises so the UUT can be removed.

The standard Analyst ems consists of a complete, ready-to-use 800 test point system with:

  1    System Electronics with Analyst ems software
  4    200 Test Point MPX Modules
  1    TestJet Technology Module and License
  1    Power Module
  1    Calibration/Verification Fixture
  1    Industrial 14-slot Chassis with USB system module
  1    Tower PC with USB control
  1    Printer
  1    TR-9-2000-QC Long-Travel Pneumatic Fixture System

The Tower PC includes a swing-arm to mount and position the LCD display at a comfortable height and angle for the test station operator.